Home Knowledge and Support Frequently Asked Questions Installation What is the proper way to install a hanging pedestal?

Frequently Asked Question

What is the proper way to install a hanging pedestal?
  • Hanging pedestals should be installed while the table is upside down to prevent pulling on the metal inserts before the assembly machine screws are completely tighten causing the metal inserts on the bottom of table top to securely anchored or ,in the case of no metal inserts on the bottom of table top and wood screws are provided for installation, to prevent wood particle built-up between bottom of top and top of hanging pedestal.

  • Installation of handing pedestals require drawers to be removed.  To remove a drawer, pull the drawer all the way out and lift the tabs on either sides of the drawers while giving the drawer a good tug to release it from the end stop.  Release the tabs and continue to pull the drawer out from the pedestal casing.  Install the pedestal with the screws provided.

  • Once the pedestal is installed, the table could be flipped right side up.  Reinstall the drawers into the pedestal making sure that the ball bearing assemblies on the cabinet side of the slides are all the way out.